Inspections

VA 08005 

Inspection Procedure

VA 08006 

Monitoring Procedure in Accordance with the LBO

VA 08007

Inspection Procedure in Accordance with the BauPVO

VA 08008 

Inspection Procedure in Accordance with Private-Law Certification Programs

DIN 18200 

Declaration of Conformity for Construction Products – Factory
Production Control, Third-Party Supervision, and Certification
(excluding Section 3.5 Certification)

DIN EN ISO 52000-1

Energy efficiency of buildings – Specifications for the assessment of the energy efficiency of buildings – Part 1: General framework and procedures

DIN EN 274-3 

Drainage fittings for sanitary fixtures — Part 3: Quality control

DIN EN 303-1 

Boilers — Part 1: Boilers with forced-draft burners — Definitions, general requirements, testing, and marking

DIN EN 442-1 

Radiators and convectors — Part 1: Technical specifications and requirements

DIN EN 598 

Pipes, fittings, and accessories made of ductile cast iron and their joints for wastewater disposal — Requirements and test methods

DIN EN 877 

Pipes and fittings made of cast iron, their joints, and accessories for building drainage—Requirements, test methods, and quality assurance

DIN EN 997 

Toilet bowls and toilet systems with integral trap

DIN EN 1123-1

Pipes and fittings made of longitudinally welded, hot-dip galvanized steel pipe with slip-on sockets for sewer lines — Part 1: Requirements, tests, quality control

DIN EN 1124-1 

Pipes and fittings made of longitudinally welded stainless steel pipe with slip-on sockets for sewer systems — Part 1: Requirements, tests, quality control

DIN EN 1124-1 Rev. 1 

Pipes and fittings made of longitudinally welded stainless steel pipe with socket joints for sewer systems — Part 1: Requirements, testing, quality control

DIN EN 1916 

Pipes and fittings made of concrete, steel-fiber-reinforced concrete, and reinforced concrete

DIN EN 12897 

Water supply—Specification for indirectly heated, unvented (closed) storage water heaters

DIN EN 12975 

Solar collectors—General requirements

DIN EN 13407 

Wall-hung urinals—Performance requirements and test methods

DIN EN 14037-1 

Ceiling-suspended heating and cooling surfaces for water with a temperature below 120 °C — Part 1: Prefabricated radiant ceiling panels for space heating — Technical specifications and requirements

DIN EN 14055 

Flush tanks for toilet bowls and urinals

DIN EN 14528 

Bidet seats—Functional requirements and test methods

DIN EN 14688

Sanitary fixtures—Washbasins—Functional requirements and test methods

DIN EN 15378-1 

Energy performance of buildings—Heating systems and domestic hot water systems in buildings—Part 1: Inspection of boilers, heating systems, and domestic hot water systems, Modules M3-11, M8-11

DIN EN 15378-3 

Energy performance of buildings — Heating systems and domestic hot water systems in buildings — Part 3: Measured overall energy efficiency, Modules M3-10, M8-10

DIN EN 16798-1 

Energy performance of buildings—Ventilation of buildings—Part 1: Input parameters for the indoor environment for the design and evaluation of the energy performance of buildings with regard to indoor air quality, temperature, lighting, and acoustics—Mo

DIN EN 16798-3 

Energy performance of buildings — Ventilation of buildings — Part 3: Ventilation of non-residential buildings — Performance requirements for ventilation and air-conditioning systems and space cooling systems (Modules M5-1, M5-4)

DIN EN 16798-17 

Energy performance of buildings—Ventilation of buildings—Part 17: Guidelines for the inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11)

DIN 1946-4 

Ventilation and Air Conditioning – Part 4: Ventilation and Air Conditioning Systems in Healthcare Buildings and Rooms

DIN 1946-6 

Ventilation and Air Conditioning – Part 6: Ventilation of Residential Units – General Requirements, Requirements for Design, Construction, Commissioning, Handover, and Maintenance

DIN 18017-3 

Ventilation of Bathrooms and Toilets Without Exterior Windows – Part 3: Ventilation Using Fans

DIN V 18599-1 

Energy Performance of Buildings – Calculation of Useful, Final, and Primary Energy Demand for Heating, Cooling, Ventilation, Domestic Hot Water, and Lighting – Part 1: General Accounting Methods, Definitions, Zoning, and Evaluation of Energy Sources

VDI 6022 Sheet 1 

Ventilation and Air Conditioning, Indoor Air Quality – Hygiene Requirements for Ventilation and Air Conditioning Systems and Equipment (VDI Ventilation Rules)

VDI 6023 Sheet 1 

Hygiene in Drinking Water Systems – Requirements for Design, Installation, Operation, and Maintenance

VDI 6031 

Acceptance Testing of Room Cooling Surfaces

CEN CCC3 

CEN Keymark Scheme Rules for Thermostatic Radiator Valves

CEN HPSG

European KEYMARK Scheme for Heat Pumps

CEN SKN 

Solar Keymark Scheme Rules

DIN Certco

Certification Program for Toilet Tanks and Urinals

(excluding certification under Section 5)

DIN Certco 

Certification Program for Radiators and Convectors

(excluding certification under Section 6)

DIN Certco 

Certification Program for Hot-Water Ceiling Radiant Panels

(excluding certification under Section 9)

DIN Certco 

Certification Program for Room-Integrated Heating and Cooling Systems with Water Flow

(excluding certification under Section 5)

Qplus Guideline R 592012-1 

Drainage Systems – Part 1: Seals

Qplus Guideline R 592012-2 

Drainage Systems – Part 2: Flexible Pipes and Fittings

Qplus Guideline prR 592012-3

Drainage Systems – Part 3: Rigid Pipes and Fittings

Qplus Guideline R 592014-1 

Sanitary Fixtures and Fittings – Part 1: Sanitary Fixtures

Qplus Guideline R 592014-2 

Sanitary Fixtures and Fittings – Part 2: Drain Fittings

Qplus Guideline R 592014-3 

Sanitary Fixtures and Fittings – Part 3: Drains for Buildings

RAL-GZ 698 

Cast Iron Drainage Technology – Quality Assurance